The FID 2000MP analyzes hydrocarbons in SHED chambers of varying dimensions. For applications over 2.5 m3, we recommend an analyzer with a heated bypass system to ensure accurate response times. For smaller SHED chambers, we offer an analyzer that minimizes the air change rate in the chamber.
- Features
- Specifications
- Options
- Resources
- Optimal sample extraction
- 4 span gas inlets
- Automatic calibration
- Automatic flame ignition
- Digital output
| Measuring component: | CxHy |
| Measuring ranges: | 4 |
| Smallest measuring range: | 0 - 10 ppm |
| Largest measuring range: | 0 - 100.000 ppm |
| Range selection: | manual / remote |
| Repeatability: | ±1% of reading |
| Instrument zero drift: | ±1% in 24 hr |
| Response time: | T90 < 1.0 second |
| Warm-up time: | 20°C to 191°C approx. 30 minutes |
| Analog output current:: | 0 - 20 mA or 4 - 20 mA |
| Analog output voltage: | 0-10V |
| Alarm: | Flame control |
| Vacuum FID: | 0.4 bar vacuum |
| Power supply: | 230V / 50 Hz |
| Power capacity: | 600 W |
| Ambient temperature: | 0 - 45°C |
| Size (H x D): | 3U x 460mm |
| Weight: | 23 kg |
Gas Requirements |
|
| Fuel: | He/H2 |
| Fuel consumption: | 150 ml/min |
| Span gas: | C3H8 |
| Span gas consumption: | 500 ml/min |
| Zero gas: | N2, 5.0 |
| Zero gas consumption: | 500 ml/min |
| Combustion air: | from room air, over active coal |
| Combustion air consumption: | 1000 ml/min |
- Heated lines
- Zero gas generator
- Unheated filter for inside SHED chamber
- Heated solenoid valve
